Buerkle
Innovative Products for Laboratory, Industry and Science.Through the Bürkle range we offer an extensive list of sampling equipment and pumps designed for transferring a broad spectrum of liquid solutions. These products are specifically designed for use in laboratory, science, and industrial environments. Click on a heading below to be directed to the relevant section
PLEASE NOTE: Product detail pages use Adobe Acrobat. To download this software for free please click here
Samplers – For liquids, powders, granulates, and pastes
Pumps – For liquids and pastes
Any pricing shown for Buerkle products is in Euros and may not be up to date so please enquire.
Click here for a Chemical Resistance Table
 |
Dip Sampler: Made from PP for rapid and simple spot checks of liquids. Available in 3 lengths. (click here for full details) |
||
 |
Disposable Plunging Siphon: For strongly adhesive liquids. PE surface minimises adhesion reducing retention and loss of material. (click here for full details) |
||
 |
Liquid-Sampler: Thumb operated for single hand operation. (click here for full details) |
||
 |
Liquid CupSampler: Stainless steel for samples of varying viscosity, with removable cup for easy cleaning. (click here for full details) |
||
 |
MiniSampler: Significantly reduces the possibility of cross-contamination as the sample liquid only comes into contact with the suction hose and sample bottle. (page 1 of details) (page 2 of details) | ||
 |
ProfiSampler: The ProfiSampler has been specially designed for rough industrial use. (page 1 of details) (page 2 of details) | ||
 |
UniSampler: With telescopic suction tube for samples from predetermined depths, or with hose for hard-to-reach spots. (page 1 of details) (page 2 of details) |
||
 |
UniSampler “EX”: For flammable liquids e.g. gasoline. Glass bottle and hose are connected to conduct electricity and are grounded via a grounding cable. (click here for full details) |
||
 |
Vampire Sampler: Portable, battery-powered hose pump for liquids. Ideal for barrels, tanks, sewage and purification systems. (page 1 of details) (page 2 of details) |
||
 |
AquaSampler: For collecting ground water samples from wells, pits etc. Ultra-pure, non-stick, highly transparent plastic construction. (click here for full details) |
||
 |
PTFE Scoop All parts that contact sample medium are inert, made from pure PTFE. Stabilised steel core rod is completely encapsulated in PTFE. (click here for full details) |
||
 |
ChemoSampler: For sampling aggressive liquids e.g. acids, alkalis, detergents, solvents. Collected into tamper-proof bottle from depths to 200cm. (click here for full details) |
||
 |
Chemistry Scoop: For aggressive liquids, with fixed rods. Parts coming into contact with sample-media are made from PP. (click here for full details) |
||
 |
TeleScoop: For industry and water treatment, with telescopic rod in variable sizes from 60cm-450cm. 4 different vessels. (page 1 of details) (page 2 of details) |
||
 |
Manually Operated Reels: Reel made of metal or plastic with cable made of stainless steel (conductive or PTFE coated) or plastic. (click here for full details) |
||
 |
Immersion Cylinders: For target spot and bottom samples of oil products. Nickel-plated brass. (click here for full details) |
||
 |
Dipping Vessel: For withdrawing liquids from tanks etc. Chrome-plated brass or stainless steel. (click here for full details) |
||
 |
Dipping Bottle EX: For flammable liquids. Made of spark-supressing metals (brass, lead). (click here for full details) |
||
 |
Dipping Bottle: For sewage plants, sludge and water samples. Nickle-plated brass stand, glass bottle. (click here for full details) |
||
 |
LiquiSampler For liquid sampling from open or closed barrels, tanks, vats etc. and open water. Materials are ultra-pure and chemically inert PTFE/FEP. (click here for full details) |
||
Samplers for Viscous Substances: |
|||
 |
ViscoSampler: Powerful suction for viscous media e.g. slurries, silt, wet clay and soil etc.. Transparent PP or chemically inert PTFT/FEP. (click here for full details) |
||
 |
Mini ViscoSampler: For small quantities of visous substances e.g. pastes, muds, creams, oils. Made from Stainless steel and electropolished. (click here for full details) |
||
 |
Valve Lance: Sampling insertion device for multilayer samples of pastes, visous and semi-liquid substances. All layers remain intact. (click here for full details) |
||
 |
QualiRod: Stainless steel hand-drill with solid handle ideal for samples from soft, paste-like substances e.g. cheese, clay, wax etc. Conical or cylindrical. (click here for full details) |
||
 |
Micro Double Spatula: For small samples of pastes, creams. Stainless steel with rectangluar and round blade. (click here for full details) |
||
 |
Spatula: For collection of pastes, greases, creams. Two sizes, stainless steel blade, wooden handle. (click here for full details) |
||
 |
Pigment Lance: For pastes and pigments. With half or quarter opening flute. (click here for full details) |
||
Samplers for Frozen Substances: |
|||
 |
IceSampler: For deep-frozen products or similar substances. (click here for full details) |
||
Samplers for Bulk Substances: |
|||
 |
Tubus: For free-flowing bulk goods up to approx 1cm diameter e.g. hazel nuts. (click here for full details) |
||
 |
Samplance: A sampling lance for removing small quanities of powder and granulates from paper or plastic bags. (click here for full details) |
||
 |
Milky: Milk powder collector for bags or casks. Stainless steel, sterilizable. (click here for full details) |
||
 |
QuickPicker: For withdrawing samples from sacks, bags or open containers. Material goes directly into sampling bottle. (page 1 of details) (page 2 of details) |
||
 |
PowderProof: Powder and granulate sampler. Sample goes directly to a plastic bag or bottle. (page 1 of details) (page 2 of details) |
||
 |
VakuSampler: Non-destructive sampling of coarse bulk goods (not suitable for dust and fine powder). (click here for full details) |
||
 |
Eagle: Sampling probe for silos. Battery operated, semi-automatic. Can be used to depth of 10m. (page 1 of details) (page 2 of details) |
||
 |
Zone Samplers: Fast cross-section sample collection from a wide variety of bulk goods from fine powders to large granulates. (page 1 of details) (page 2 of details)(page 3 of details) (page 4 of details)(page 5 of details) |
||
 |
EasySampler: Allows for quickly and easily taking numerous samples from all types of bulk materials. (click here for full details) |
||
 |
Scratcher with inner tube: For powders and granulates which are not free flowing. Allows for samples from variable zones. (click here for full details) |
||
 |
Scratcher: For cohesive, non-flowing, caking substances. Available in various sizes. (click here for full details) |
||
 |
MicroSampler: For removal of very small quantities of powders e.g. 0.2, 0.5, 5.0 and 10ml can be taken at varying depths. (click here for full details) |
||
 |
SiloPicker: Sampling of bulk goods at great depths. (click here for full details) |
||
 |
SiloDrill: Developed to take samples from silo vehicles, from levels down to 3m. (page 1 of details) (page 2 of details) |
||
Samplers for Pharmaceuticals: |
|||
 |
StickProof: Sampler for powders in the pharmaceutical industry. Stainless steel. Sample can be filled directly into sampling bag. (click here for full details) |
||
 |
PharmaPointer: For sampling very small quantities of valuable powder mixtures. Special design minimises separation of active ingredient/adjuvant mixtures during sampling. (click here for full details) |
||
 |
PharmaSpoon: High-gloss (hand polished) steel spoon allows for sampling powdery substances, intermediate products and raw materials without cross-contamination. (click here for full details) |
||
 |
UDS Cohesive Sampler: Samples can be taken from cohesive and caked materials. Stainless steel, electropolished, with different chamber volumns from 0.25-1ml. (click here for full details) |
||
 |
Novartos Uno or Multi: Uno allows for target sampling from containers. Multi allows for cross-section sampling. Takes samples without moving the lance in the material. (click here for full details) |
||
 |
PharmaPicker: For sampling very small quantities of highly potent, expensive or active powders. Tip container volumes from 0.1 -2.5ml. (click here for full details) |
||
Samplers for Soils: |
|||
 |
GeoSampler: Four types, 2 with reinforced impact heads for hard ground, 1 with foot lever for soft ground, 1 hand sampler. (click here for full details) |
||
 |
Mole: Ideal for determining soil dampness, contamination and general soil qualities. Sturdy design with four drill bits. (click here for full details) |
||
|
Pumps: |
|||
| Hazordous liquids must never be dispensed by pouring them out directly. Even the use of a funnel does not provide the required degree of safety when filling off such liquids. The purchase of a suitable pump for dispensing hazardous liquids is an investment in health and safety for your employees that pays for itself in a short time. |
|||
 |
1. OTAL Foot Pumps: A convenient pump for hands free use suitable for industrial aplications. (page 1 of details) (page 2 of details) |
||
 |
2. OTAL Hand Pumps: A compact, space saving pump with a good discharge rate. (click here for full details) |
||
 |
3. Solvent Pump: The ideal solution for dispensing high-purity liquids. Available in either foot operated or hand operated models. (click here for full details) |
||
 |
4. Pump-it® – Container Pump: Designed for emptying cansiters and small containers up to 60L rapidly and cleanly. (click here for full details) |
||
 |
5. PumpMaster Container & Barrel Pump: Designed for fast and clean emptying of containers by generating pressure using the piston handpump.. (click here for full details) |
||
 |
6. Siphon: Eay-to-use devices for the rapid transfer of liquids from a higher container to a lower one. (click here for full details) |
||
 |
7. AkkuPump: Designed for applications in which small amounts of liquid need to be dispensed. (page 1 of details) (page 2 of details) |
||
 |
8. PP Barrel Pump: Polypropylene Barrel pumps allow for the rapid and economical dispensing of liquids. (page 1 of details) (page 2 of details) |
||
 |
9. Stainless Steel Barrel Pump: Designed for dispensing combustible and flammable liquids. (page 1 of details) (page 2 of details) |
||
 |
10. Accessories for Barrel Pumps: (click here for full details) |
||
 |
11. Anti-static set: Prevents electrostatic charging. (click here for full details) |
||
 |
12. Safety stand for Pumps: Protects against leaking chemicals. (click here for full details) |
||
 |
13. Gas-tight Barrel Pumps: Made of either PP or Stainless Steel, these pumps allow odour-free transference of liquids. (click here for full details) |
||
 |
14. PTFE Barrel Pump Ultrapure: Designed specifically for the transference of ultrapure liquids. (click here for full details) |
||
 |
15. Oil-free Double-diaphragm pumps: Operated by compressed air, these pumps are ideal for transferring viscous, corrosive, abrasive and flammable liquids. (click here for full details) |
||
 |
16. Piston Pump: For aqueous and petrochemical products. (click here for full details) |
||
 |
17. Battery Pump: Handpump for safe filling of car batteries (click here for full details) |
||
 |
18. Rotary Piston Pump: Can be used directly between tubing connections and also as a barrel pump with a stiff filling tube or flexible filling hose. (click here for full details) |
||
 |
19. Hand-operated Lever Pump: Suitable for petrochemical substances. Made from silver covered aluminium cast. Valves and piston made from plastic (PA). (click here for full details) |
||
 |
20. Drum Pumps – for acids and alkalis: For weaker acids such as hydrochloric acid, phosphoric acid, chromic acid, battery acid, citric acid. (click here for full details) |
||
 |
21. Drum Pumps – for concentrated acids and alkalis: For highly aggressive acids and alkalis such as sulphuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite. (click here for full details) |
||
 |
22. Drum Pumps – for mineral oils: For light viscous mineral oil products such as diesel, fuel oil, hydraulic fluid, machinery and motor oil. (click here for full details) |
||
 |
23. Drum Pumps – for solvents: For highly flammable hydrocarbons such as ethanol, benzine, butanol, isopropanol, kerosine, methanol. (click here for full details) |
||
 |
24. Eccentric worm pump HD-E: Suitable for pumping acidic and alkaline liquids, oils, used oil, waste liquids, paint, foodstuffs, cosmetics and creams. (click here for full details) |
||
 |
25. Laboratory Pump: Suitable for the transfer of small quantities of aqueous liquids. (click here for full details) |
||
 |
26. Electric barrel Pump Petro: Suitable for pumping diesel oil, fuel oil, antifreeze. (click here for full details) |
||
 |
27. Metering Pumps: Optimal pump for use in humid atmospheres and laboratory areas. (click here for full details) |
||
 |
28. Vacuum Pump/Compressor: A robust, universal pump, that can be used as a vacuum or pressure pump and is suitable for continuous operation. (click here for full details) |
||
 |
29. Laboplast stopcocks for bottles: Completely water tight and easily operated.. (click here for full details) |
||
 |
30. Ball valve: Stable, industrial quality with high throughflow volume. (click here for full details) |
||
 |
31. Dosifüll: Specially developed for the exact filling and dosage of all kinds of liquids. (page 1 of details) (page 2 of details) |
||
 |
32. Dosipast Liquid transfer Pump: Specially developed for the manual filling of high viscosity products such as creams, salves, emulsions, shampoos. (click here for full details) |
||
 |
33. Wall-Mounted Dosing Machines: For simple, clean, and precise dosing of resins, varnishes and many other pumpable materials. (click here for full details) |
||
 |
34. Flachmann: Designed to bring more contents onto less shelf space. (click here for full details) |
||
|
Through Buerkle we are also able to offer a range of Plastic Labware, Containers, and Fittings, Valves and Hoses. To view the complete Buerkle product range please visit www.buerkle.de |
|||